CLEARANCE CORNER

From time to time we shall list items here that are either overstocked or surplus to our own requirements. Check the contents of this page on a regular basis, or you may miss a bargain!

Please phone us to order any of these items so that we can confirm availability.

Clearance Corner Specials

Due to overstocking we are currently offering the following coach sides at a low price of £6.50 per pair. This £3.00 saving is also carried over into the price of a complete kit.
E33 Gresley Third Non-gangwayed Diag D56/7 51' 1" Introduced 1925

W54 sides

We have a very small number of old style packs of W54 sides, Open First - Super Saloon. They are NOT suitable for use with the current end packs, but could be used as overlays on the ex Airfix now Hornby Centenaries.

£6.50 per pair

Loco Frames


Following the introduction of our new version of LF42 for the BR Standard 2-6-4T, we have a limited number of the old style available at reduced price. LF42 (old style) £9.00

(Photograph shows LF4)


Etched nickel silver Motion Sets

As we now include the motion on the same fret as the updated loco frames of certain locos, the following motion frets are available only while stocks last, and will not be re-etched.
LM28 GWR 56xx 0-6-2T
LM33 LNER J72 0-6-0T
LM34 LNER N2 0-6-2T

All at £4.75

W&T Driving Wheels

We have a limited quantity of the 21mm W&T Driving wheels. These have 17 spokes, and as described on the main catalogue page, they are compatible with the standard Romford square ended axle, thus making quartering very straightforward. They have the hole ready tapped for Romford crankpins in the moulded plastic wheel centre, and are fitted with nickel plated brass tyres. Scaling out at 5'3" they are a useful alternative to Romford wheels. £2.60 each

Loco Detailing Frets
If you can't stretch to a complete kit or a full detailing pack right now, or just want to improve on an rtr item, these parts are offered with no fittings, no instructions, just the detailing etch at a bargain price.


LS75 Detailing fret for the rebuilt Royal Scot £10.50

Fret includes smoke deflectors, balance weights, cab spectacle plate/sides/doors/floor, fall plate, rear step unit, guard irons, etc.
LS77 Detailing fret for the Stanier LMS 8F £9.50

Fret includes balance weights, cab roof/sides/doors/floor, fall plate, rear step unit, buffer beam overlay, etc.
LS78 Detailing fret for Coronations 46220-55 £7.25

Fret includes frame extensions, cab floor and doors, fall plate, etc.
LS79 Detailing fret for Coronations 6256/46257 £7.25

Fret includes frames extensions, cab floor/sides/doors, fall plate, etc.

[Jump to Top][Back to Catalogue]

sales@cometmodels.co.uk
Tel: +44 (0)5602 602 188

Copyright © 2001 Comet Models